Robinson Grating Products
Bar Grating
Plank Grating
Fiberglass Grating
Handrail Fittings
Safety Noses
Precast Trench
Peforated Metal
Woven Wire
Expanded Metal
Structural Stair Treads

American Safety Tread structural stair treads and platforms are in use daily throughout the United States. The anti-slip granules embedded in the walking surface create a positive traction system that lasts for the life of the stairway.
Several designs are self-supporting, requiring no risers or bracing. Other designs are installed with carrier angles and risers. The choices are many.

When a heavy duty commuter stairway or industrial stairway is the design project, structural castings by American Safety Tread will provide the safety required by OSHA.

LONGEST WEARING: Effective anti-slip protection is guaranteed for the life of the stairway.

IMPACT RESISTANT: The alloys used in the manufacture of these cast structural treads and platforms create highly impact-resistant treads to accommodate heavy interior and exterior use.

ANTI-SLIP SURFACE: Whether wet or dry these treads afford maximum protection against slipping hazards. The proper blend of abrasive granules embedded in the exposed walking surface assures secure traction under foot.

ECONOMICAL: Available in four metals, these cast structural treads and platforms are the most economical on the market. Our advanced manufacturing equipment and special American Safety Tread molding process assure the lowest cost per unit.



Choice of Metals
ALUMACASTCorrosion resistant, maintenance-free aluminum alloy for exterior and interior use.
lFERACASTCast iron all purpose usage. Withstands heavy industrial punishment.
BRONZACASTRich bronze finish makes this an ideal choice when fine architectural effects must be achieved and maintained.
NICKELCASTA combination of cast nickel and bronze designed to blend with stainlesss steel architecture.
Tread Width - - - (Holes in end lugs for 1/2" diameter bolts)
4"1 3/8"1 1/4"1 3/8"
5"1 1/2"2"1 1/2"
6"1 1/2"3"1 1/2"
7"1 3/4"3 1/2"1 3/4"
8"2"4"2"
9"2"5"2"
10"2"6"2"
11"2"7"2"
12"2"8"2"




    Recommended Thickness for Structural Threads
     To To To 
    Span3'0"4'0"5'0"
    Thickness7/16"1/2"5/8"

    Thickness is for foundry casting purposes and may not be adequate for structural strength.





Style 805


Style 806


Style 807


Style 817A


Style 800


Style 801


Style 802


Style 803


Style 804


Style 806A


Style 807A


Style 817


©Copyright 2003 Robertson Grating Products All Rights Reserved

Site by GCM Development